Onboard SOC Real-time Processor: XC7Z020-2CLG484I
Onboard 2x AD9361 RF Transceiver Chips, compatible with AD80305
Features 1x Gigabit Ethernet Port
Features 1x USB Serial Port, 1x USB OTG, 1x SD Card
ADC/DAC Sampling Bit Width: 12-bit
2x TX, 2x RX, supporting full-duplex or half-duplex operation

This Software Defined Radio (SDR) processing platform, based on Xilinx ZYNQ SOC, utilizes a high-performance Xilinx ZYNQ series SOC (XC7Z020) to achieve 2-channel AD9361 wireless RF signal transmission and reception. It is widely applicable to applications such as SDR, mobile base stations, Wi-Fi, wireless local area networks, and specialized or general-purpose wireless devices. The ZYNQ7000 is an extensible processing platform launched by Xilinx. The ZYNQ SOC integrates a dual-core ARM Cortex-A9 processor, perfectly coupling the programmability of the FPGA with the video and multimedia interfaces of the ARM, making it suitable for low-power, low-cost signal processing products. Data interaction between the PS (Processing System) and PL (Programmable Logic) of this SOC is achieved via high-speed HP (High Performance) interfaces. The PS side can run operating systems like Linux and features an embedded Gigabit Ethernet protocol stack, making it easy to implement Ethernet TCP/IP protocol transmission. The PL side contains abundant programmable logic resources for front-end signal processing and other tasks.

Technical Specifications

Onboard SOC Real-time Processor: XC7Z020-2CLG484I;
Hardware Features:
1. Onboard 2x AD9361 RF Transceiver Chips, compatible with AD80305;
2. Features 1x Gigabit Ethernet Port;
3. Features 1x USB Serial Port, 1x USB OTG, 1x SD Card;
RF Specifications:
1. RF Frequency: 60MHz~6GHz;
2. ADC/DAC Sampling Bit Width: 12-bit;
3. 2x TX, 2x RX, supporting full-duplex or half-duplex operation;
4. RF Matching Impedance: 50 Ohms;
5. Instantaneous Bandwidth: 56MHz;
6. Shielded Protection Design
Dynamic Storage Performance:
1. Memory Bandwidth: 32-bit, DDR3 SDRAM, 500MHz operating clock;
2. Memory Capacity: Supports up to 4GByte DDR3 SDRAM;
Other Interface Features:
1. Features JTAG On-line Debugging Interface;
2. Features 1x RS232 Serial Port, connected to the PS side;
3. Features 1x SPI Flash for ZYNQ loading;
Physical and Electrical Characteristics
1. Board Dimensions: 100 x 160mm
2. Board Power Supply: 1.6A max@+12V (±5%)
3. Cooling Method: Metal Cold Plate Cooling
Environmental Characteristics
1. Operating Temperature: -40°~﹢85°C;
2. Storage Temperature: -55°~﹢125°C;
3. Operating Humidity: 5%~95%, non-condensing

Application Areas

Software Defined Radio (SDR);
Radar and Baseband Signal Processing;
High-speed Image and Graphics Processing;