4x 100G QSFP28 Fiber Channels
PCIe x16 Host Interface, supports XDMA, supports SG DMA
Fiber channels support Aurora and other protocol standards, up to 25Gbps/lane
2 independent sets of DDR4 SDRAM buffers, operating clock frequency 1200MHz
Multiple digital discrete I/O interfaces
High-performance clock management unit

Functional Block Diagram

A 4-channel QSFP28 100G Fibre Channel adapter based on a PCIe bus architecture. The card features one PCIe Gen3x16 host interface and a total of four QSFP28 100G fiber interfaces, enabling real-time data acquisition, real-time buffering, and high-speed PCIe transmission for four QSFP28 100G fiber channels. The card uses Xilinx's high-performance Virtex UltraScale+ series FPGA XCVU3P as the main processor, with two independent sets of 80-bit DDR4 SDRAM for large-capacity data buffering. The card also includes one RJ45 Gigabit Ethernet port and several I/O control signals. This standard full-height PCIe card can be widely applied in server-based Fibre Channel data acquisition, data transmission, and other scenarios.

Key Features

Standard PCI Express full-height card;
Compliant with PCI Express Gen3.0 specification, selectable x1, x4, x8, or x16 modes, with a bandwidth of 128Gbps;
Fiber transmission performance: Supports 4-channel QSFP28 100G fiber, 25Gbps/lane line rate;
Fiber transmission protocols: Supports Aurora and various other high-speed protocols;
Dynamic storage performance: 2 sets of 80-bit 4GByte DDR4 SDRAM, operating clock 1200MHz, operating data rate 2400Mbps;
The card supports one FMC expansion interface;
The card supports multiple discrete I/O interfaces for GPIO expansion;
Onboard 2x 256Mbyte QSPI NorFlash for FPGA loading;

Interface Characteristics

Front panel supports 3x QSFP28 Cages (supports 25Gbps/lane);
Rear panel supports 1x QSFP28 Cage (supports 25Gbps/lane);
Rear panel supports 1x RJ45 Gigabit Ethernet interface;

Software Support

Optional integrated Board Support Package (BSP):
1. FPGA DDR4 interface test program;
2. 4-channel 100G fiber interface program, supports Aurora protocol;
3. PCIe interface test DEMO;
Provides drivers and Application Programming Interfaces (API):
1. Supports Windows 7 32-bit/64-bit operating systems;
2. Supports Linux operating systems;

Application Scenarios

Image acquisition systems
Analog data fiber acquisition and transmission systems
Radar system hardware-in-the-loop simulation
Network hardware acceleration

System Environment

Card Dimensions

106.65 x 200 mm

Operating Temperature

-40°~+85°C

Card Power Supply

4A max@12VDC(±5%)

Storage Temperature

-50°~+125°C

Cooling Method

Natural air cooling

Operating Humidity

5%~95%, non-condensing