Title: Cost-Effective Intelligent Edge Analytics All-in-One Device Based on RK3588

Content:

1. Product Overview

The INT-AIBOX-RK4 intelligent edge analytics all-in-one device is a high-performance, low-power edge computing solution. Powered by the domestic TPU chip RK3588, it features an integrated 6 TOPS NPU for AI computing and supports up to 8K video encoding and decoding.

This product integrates high-precision AI intelligent algorithms based on computer vision and deep learning networks, along with a comprehensive video intelligence management platform. The AI algorithms support various application scenarios such as industrial parks, residential communities, construction sites, and campuses, and can be flexibly combined and configured according to specific needs. The video intelligence management platform enables front-end device management, real-time video preview, alarm notifications, evidence capture, online algorithm loading and optimization, and data visualization dashboards. The device is easy to operate, plug-and-play, and provides rich northbound API interfaces to empower large-scale upper-layer business platforms.

1. Product Features

Ultra-High Performance Computing and Codec Capabilities

Up to 6 TOPS peak NPU computing power;
Supports full-process processing of up to 4 channels of 1080P HD video;
Supports hardware decoding of up to 4 channels of H.264/H.265 1080P@25FPS video;
Supports hardware encoding of up to 4 channels of H.264/H.265 1080P@25FPS video.

Built-in Rich AI Algorithms

Comes with over 30 built-in AI algorithms, supporting flexible combinations and custom configurations;

(Supported algorithms include: flame detection, smoke detection, smoking detection, phone call detection, mobile phone usage detection, face mask not worn detection, personnel absence detection, personnel sleeping on duty detection, personnel fall detection, area people counting, insufficient personnel in area, overcrowding detection, abnormal personnel count, intrusion detection, workwear detection, safety helmet detection, reflective vest detection, electric vehicle detection, proper parking (illegal parking) detection, entrance/exit pedestrian flow counting, vehicle flow counting, perimeter climbing intrusion, personnel crossing boundary detection, loitering detection, trash not in bin detection, overflowing trash bin detection, garbage disposal reminder, camera abnormal displacement detection, etc.)

Each video channel supports up to 3 simultaneous AI analysis tasks;
Supports up to 4 concurrent video AI analysis tasks; when more than 4 tasks are required, polling analysis is supported.

Rich Interfaces and Flexible Deployment

Rich interface support: 1000M Ethernet, USB3.0/USB2.0, HDMI, RS-485, RS-232;
Supports wide operating temperature range from -20°C to +60°C;
IP40 protection rating, fanless heat dissipation design;
Northbound interfaces: HTTP, MQTT, GB28181;
Southbound interfaces: GB28181, ONVIF, RTSP.

High Reliability and Encryption Protection

Supports high-capacity eMMC with optional primary/backup partitioning;
Supports alarm and protection mechanisms for abnormal faults;
Equipped with programmable encryption chip for privacy data protection.

User-Friendly Toolchain and Flexible Development

Supports mainstream deep learning frameworks: Caffe, DarkNet, TensorFlow, PyTorch, MXNet, ONNX, PaddlePaddle;
Supports classification and detection network models, with support for custom operator development;

Supports Docker containerization for rapid algorithm application deployment.

1. Technical Specifications

Specifications

Model

INT-AIBOX-RK-4

Technical Details

Chip

NPU

RK3588 6 TOPS

CPU

Octa-core Cortex-A76 + Cortex-A55, 2.4GHz

Video/Image Codec

Video Decoding Capability

Supports H.265/H.264/AV1/VP9/AVS2 video decoding, up to 8K60FPS

Video Encoding Capability

Supports H.264/H.265 video encoding, up to 8K30FPS

Memory and Storage

Memory

8GB

eMMC

128 GB

External Interfaces

Ethernet

10/100/1000Mbps auto-sensing

USB

USB3.0 ×2 / USB2.0 ×3

Display

HDMI ×1

Audio

3.5mm audio jack ×1

Power Button

PWR power on/off button

Phoenix Terminal

Digital I/O / Alarm ×4

Physical Dimensions

Dimensions

Length × Width × Height

177.5 mm × 120 mm × 48.75 mm

Power and Power Consumption

Power Supply

DC +12V / 2A

Typical Power Consumption

~8W (varies depending on configuration)

1. Product Appearance and Dimensions
  1. Front Panel Interface Diagram

Front Panel Silkscreen

Name

Description

PWR

Power On/Off Button / LED Indicator

Power On/Off Button / LED Indicator Description:

Press and hold for 3 seconds to power on; solid green light indicates normal power status;
Press and hold for 3 seconds to power off; solid red light indicates power is off.

USB*2

USB Ports

Two USB 2.0 ports, top and bottom.

Debug Transmit Signal

Debug transmit signal, must be used with RX.

Debug Receive Signal

Debug receive signal, must be used with TX.

RS485 Positive

Positive terminal of RS485 interface, used with B1.

RS485 Negative

Negative terminal of RS485 interface, used with A1.

RS485 Positive

Positive terminal of RS485 interface, used with B2.

RS485 Negative

Negative terminal of RS485 interface, used with A2.

IN1

I/O1 Input

GPIO1 input, can be used as alarm input.

IN2

I/O2 Input

GPIO2 input, can be used as alarm input.

COM

RELAY Common Terminal

Common terminal for relay wiring.

RELAY Normally Open

Normally open terminal for relay wiring.

RELAY Normally Closed

Normally closed terminal for relay wiring.

12V

DC Output Port

DC 12V power output port.

GND

Ground Signal

Ground signal for phoenix terminal.

1. 1. Rear Panel Interface Diagram

Rear Panel Silkscreen

Name

Description

DC IN

Power Input

12V power input, DC +12V / 2A

LAN

Ethernet Port

RJ45 Ethernet port, 1000M/100M/10M

HDMI

HDMI Output Port

Directly connect to display to access the platform

1. Installation Requirements

Category

Item

Description

Environmental Requirements

Ventilation

Ensure good air circulation in the installation environment, with adequate space around the device for heat dissipation.
Do not place the device near heat sources (e.g., heaters, hot objects).

Dust Protection

Outdoor installation environments (e.g., surveillance equipment boxes, pole-mounted enclosures) must meet IP40 protection rating.

Moisture Protection

Do not place the device near water sources (e.g., restrooms).
Do not operate the device in environments with condensation or water leakage.

Electromagnetic Requirements

Keep away from power system grounding devices; do not share grounding.
Keep away from high-power radio stations, radar, and other high-frequency, high-current equipment.
In strong electromagnetic environments, electromagnetic shielding is recommended for device protection.

Location Requirements

Suitable Locations

Server rooms, sealed air-conditioned rooms, air-conditioned cabinets.
Hallways, underground parking garages, venues, non-open-air platforms.

Unsuitable Locations

Outdoor coastal environments (e.g., near sea, offshore, underwater).

Space Requirements

Cabinet Requirements

Standard 19-inch rack (with grounding and ventilation capabilities).

Enclosure Requirements

Enclosure must meet IP40 protection rating and provide ventilation and heat dissipation.

Safety Requirements

ESD Protection

Ensure the device is properly grounded.
Wear anti-static clothing and use anti-static gloves or wrist strap during installation.

1. Intelligent AI Management Platform

The platform includes six major modules: intelligent monitoring, alarm center, intelligent analysis, device management, basic data, and system management.

1. 1. Platform Login

Access the platform login page by entering the device IP address in a web browser. Log in using the default username/password: admin/123456.

1. 1. Platform Basic Mode

1. 1. Visualization Mode
1. 1. Alarm Center

View alerts for behavior analysis events, vehicle alerts, personnel alerts, etc.

1. 1. Intelligent Analysis

View structured data for person attributes and vehicle attributes.

1. 1. Device Management

Supports cascading multiple intelligent edge all-in-one devices; supports integration of AI-enabled smart cameras; supports legacy integration of conventional cameras.

Supports integration of IoT devices and network devices.

1. 1. Basic Data

Supports importing face databases, license plate databases, and general workwear databases.

1. 1. System Management

Supports system network configuration, algorithm upgrades, platform upgrades, and system maintenance.