10 kS/s/ch, 350 Ω Quarter-Bridge Strain Gauge, 8-Channel C Series Strain/Bridge Input Module

The NI‑9236 can simultaneously measure dynamic strain on all channels, enabling high-speed synchronous measurements. This feature is crucial for applications requiring comparison of multiple channels at specific moments, such as impact testing.\n\nThe NI‑9236 features built-in voltage excitation for quarter-bridge sensors. It also offers 60 VDC isolation and 1,000 Vrms transient isolation, providing high common-mode noise rejection and enhanced safety.

III. Product Applications The XM-USB-4431 is a USB 2.0 bus-based data acquisition card that can be directly connected to a computer's USB port to form data acquisition, waveform analysis, and processing systems in various fields such as laboratories and product quality inspection centers. It can also be used to build industrial production process monitoring systems. Its main applications include:  Sound/Vibration Signal Acquisition and Analysis  Electronic Product Quality Inspection  Medical Testing  High-Precision Synchronous Signal Acquisition  I/O Control IV. Performance Features  A/D Converter: 24-bit Σ-Δ ADC: AD7765 (optional support for 312 KSPS AD7764)  Low intrinsic noise, high channel isolation;  Differential input range: ±10V;  Independent programmable gain, 4 adjustable levels: 1x, 10x, 100x, and 1000x;  AD Trigger Modes: Software timed trigger, external trigger;  Supports pre-trigger, with a maximum pre-acquisition of 2K points;  IEPE Constant Current Source: 4.38mA @2% (the board may require an external 5V power supply, depending on the USB port's power capability);  IEPE Sensor Excitation Voltage: 15V or 24V;  Constant Current Source Output Impedance: >250 kΩ at 1kHz;  Constant Current Source Noise: <500 pA/√Hz;  Coupling Mode: AC/DC;  AC Coupling -3dB Cutoff Frequency: 0.53Hz;  Analog input signal with TVS clamp protection function;  Sampling frequency can be software-configured (range: 1.95KHz～156.25KHz);  Onboard large-capacity memory (4M words), supports continuous acquisition for real-time monitoring;  Onboard EEPROM, users can write custom parameters;  Board ID recognition (0～15), supports multi-card operation;  8-channel DI/DO; outputs with latch function, automatically cleared on power-up;  Provides drivers and dynamic link libraries for WIN7/VISTA/2000/XP;  Dimensions (excluding casing): 91(W) × 139(L) (mm); V. Technical Parameters ·Operating Voltage: 5V±0.25V ·Operating Temperature: 0℃～70℃ ·Storage Temperature: -10℃～85℃ ·Humidity: 5%～95% VI. Working Principle 6.1, Logic Block Diagram

6.2, Brief Description of Working Principle The XM-USB-4431 is composed of the following functional modules: USB 2.0 bus bridge circuit, address decoding and data latching, AD conversion, data storage, and other functions. Address Decoding and Data Latching: Controlled by a Field-Programmable Gate Array (FPGA) chip. As it uses a USB 2.0 bus, users do not need to worry about specific I/O addresses and can directly call the dynamic link libraries provided by our company. In 8-bit data mode, specific I/O addresses are interpreted by the USB master control chip. AD Conversion: External analog signals are input via SMB0..SMB3, pass through 4 levels of programmable gain, enter the ADC, and the AD control timing is completed by the FPGA. Data Storage: The results of AD conversion are stored in SDRAM. The timing for reading and writing data is controlled by the FPGA. Digital I/O: 8 channels of digital input, 8 channels of digital output. Outputs have a latch function and are automatically cleared on power-up. Frequency Measurement Principle: Measures the interval between two adjacent rising edges of a signal (square wave). For example, when the software issues a measurement command, the interval between two adjacent rising edges of the signal under test is measured using a 4MHz system clock. This interval is represented by the number of system clock cycles, allowing users to easily calculate the signal's frequency. Since the maximum interval is represented by 24-bit data (maximum 0xFFFFFF, i.e., 16777215), the maximum timing duration is 4.19S (16777215 * 0.25 µs ≈ 4.194303S).

Note: When the START signal is low, the software initiates a frequency measurement, measuring the time width between two adjacent rising edges of the signal under test (which is 5 system clock cycles, with a system clock of 4MHz). In the diagram, the TimerOver signal: 1 indicates frequency measurement is not finished; 0 indicates frequency measurement is finished.