Custom Virtex-4 CameraLink Development Board with PCI Image Acquisition Card, FPGA-HDMI Encoding, and LVDS Camera Support

CameraLink development board, supporting both Full mode and Base mode. Image data can be transmitted to an ARM processor via a ribbon cable for processing.

FPGA: Virtex-4

CameraLink Interface Chip: DS90CR288AMTD, dual-channel

Supported Modes: Full mode and Base mode

Onboard RAM: IS61LV25616AL*4 = 1M*16

Onboard VGA Interface: ADV7123

Camera Interface: Can be directly connected to common off-the-shelf ARM and DSP development boards via FPC ribbon cable.

Peripheral Interfaces: Two serial ports, GPIO ports